SCRUBBING MACHINE
Single sided or double sided machine for deoxidizing, light deburring and surface finishing of printed circuit board. All types of brushes can be used on the machine. Brush changing is simpler. Deburring or scrubbing is complete by high pressure water rinsing ater recirculating system is also present. Total interior is made by PVC sheet and stainless steel. Each brush has independent drive and can be operated seperately. Conveyor speed is variable from 0.25m to 1.5m/min
Technical Data:
| Max. Board Width | : | 450 mm |
| Brushes | : | o. d. 125 mm x 450 mm |
| Brush Revolutions | : | 2100 rpm |
| Transport Speed | : | 0.25 m/min to 5 m/min |
| Board Thickness | : | 0.2 mm to 5 mm |
| Electrical Supply | : | Single / Three Phase |
| Floor space | : | 1000 mm x 1200 mm x 650 mm |
| Gear motor | : | 0 to 90 rpm. A. C. Universal |
DRY FILM LAMINATORS
This Machines is used to apply film to both sides of P.C.B
Technical Data:
| Overall Dimensions | : | 470mm x 600mm L x 600mm H |
| Weight Capacity | : | 50 kg. |
| Heater Capacity | : | 2000 W (Teflon Coats) |
| Max. Lamination Width | : | 400 mm |
| Max. Panel Thickness | : | 0.2 to 5 mm |
| Electrical Supply | : | Single Phase 240 V. 16 Amp. |
| Temp . Indi. Controller | : | Digital 0 to 150°C |
CONVEYOR TYPE ETCHING MACHINE
This machine is used for Chemical etching process for PCB. Machine is suitable for Chromicacid, Ferric, Alkaline solution etching. Conveyor speed can be varied as per requirement.
Technical Data:
| Total fabrication of PVC | : | 10 mm and 6 mm |
| Types of gears | : | Worm Gears and other gears of P.P. |
| Material | : | Motor shifts made out of Titanium material |
| Type of pump | : | Chemical pump polypropylene |
| Design | : | Special Nozzle design |
| Variable speed conveyor | : | 0 to 300 RPM. |
| Gear motor D. C. universal | : | 200 to 300 RPM. |
| Electrical supply | : | 3 phase 15 Amp. |
| Tank Capacity | : | 200 litre. |
PHOTO PRINTING MACHINE
This Machine is used as exposing machine for printing on preinted circuits boards. This Machine can be used for both dry film and PISM exposing. This is a double lamp (top & bottom) Machine consisting of Ultra violet tubes, control panel having separate switches for upper and lower tubes. It also has Timer and Vaccum meter.
Technical Data:
| Max. frame exposing area | : | 600 mm x 750 mm |
| U. V. Tubes | : | 2000 watts each (Total 2 nos.) or as per requirement. |
| Cooling | : | Air Exhaust |
| Cabinet Dimension | : | 100 mm(L) x 180 mm |
V- GROOVING / V- SCORING MACHINE
This Machines is used to for 'V' Grooving on P.C.B.
Technical Data:
| Totel Fabrication | : | M.S Sheet & Stainless Steel |
| Input Load | : | 10 Amp. 440 Volt. |
| Motor | : | 1 H.P. 1440 RPM -2 Nos. |
| Dimension | : | 305 mm(D) x800 mm (w) x 1050 mm (H) |
| Weight | : | 105 kg. |
| Conveyour Speed | : | 0.5 m to 2 m/min |
| Maximum Grooving Width | : | 375 mm |
| Maximum Panel Thickness | : | 0.3 to 5 mm |
